In particular, the eyepiece shades, stage handle, focusing knob, and nosepiece are commonly touched during microscope operation, so these parts must be cleaned and sterilized carefully. Disinfecting after cleaning helps to lower the risk of spreading infection to other lab members. Next, disinfect the surface to kill any germs. Here are some best practices to keep your microscope and optical system clean and sterilized.Ĭleaning and Disinfecting Your Microscope FrameĪfter you use a microscope, clean the frame if you notice any dirt and impurities on the surfaces. Consequently, cleaning and disinfecting your microscope regularly is important to help keep lab technicians and research staff safe and healthy. Of course, unless you want to use it with a Type G socket instead of the many other types, you will need to use another (grounded!) adapter to convert it to your desired (grounded!) wall socket.Viruses can remain infectious on surfaces like metal, glass, or plastic for hours to days. Technically you could hack the not grounded 3 prong UK (Type G) adapter (that I mentioned before) to connect the ground prong to the grounding pin as shown in this tutorial. The metal is more visible in the magnified picture on the right. The left picture from this answer shows the difference. So at Apple, the rule of thumb is that if it is an extension cord, then the socket is connected to the ground pin so it is probably grounded, if it is the small adapter, then there is no connection in the socket so no grounding for you: You have to carry that extra 1.8 meter of cable tho.
This is a 3 prong UK plug that has a grounding prong, but they haven't connected it! Fortunately at the extension cord there is a connection. Obviously a 2 pin/prong plug is not grounded, you'll need one with 3 of them, but even in this case you have to check if the adapter's socket/shoe has metal in it (AKA is connected to the ground), because you can't take that granted at Apple! Just check out this picture from this article: The charger can be grounded because the metal pin that holds the adapter is (subtly) also the ground: I have on occasion intentionally grounded one of the plastic feet with foil when I am waiting for the electrician to fix an outlet or I am working in a location where I can't get a proper ground. This sort of ground current drives me nuts (even though it's normally totally safe).
#How to clean a macbook body mac
You'll have to check with an electrician or take your mac to another outlet that is known to be properly grounded if you are already grounding it through the wall if you still feel the tingle with a grounded cord. You shouldn't be able to feel any tingle due to you being better grounded than the mac if your outlet is properly grounded. The adapter article from Apple has some good tips and a nice picture. (Or unearthed to some) Use a three conductor plug to ground the device and check your MagSafe pins to be sure they extend fully and mate correctly with the Mac. In the US, standard power means the "duck head" two prong connector is ungrounded. Your specific mac only grounds itself through the magsafe connector if you are using a grounded plug.